Jeppesen Mobile FliteDeck for iPad - Manual (Page 53)

Accessing Terminal Chart Information
Automatic Display of the Taxi Diagram Upon Landing
Jeppesen Mobile FliteDeck User Guide October 2014
Copyright © 2014 Jeppesen. All rights reserved.
46
Automatic Display of the Taxi Diagram Upon Landing
The taxi diagram for the airport at which you are landing
automatically displays in Mobile FliteDeck when:
• Show Taxi On Landing is set to ON from the Settings
button on the Mobile FliteDeck toolbar.
• The minimum required GPS accuracy to display ownship
on taxi diagrams is met.
NOTE The automatic display of a taxi diagram is based on the
speed threshold that is specified for in the Arpt Diagram (10-9)
Speed Threshold in JeppFD global settings. The speed
threshold is 40 knots by default.
View Terminal Weather
Weather data is provided by Jeppesen weather services and is
obtained from either the National Weather Service or the UK
Meteorological Office.
NOTE To receive terminal weather, Display METAR/TAF in
JeppFD global settings must be set to ON and an Internet
connection must be established.
To view METAR or TAF weather data:
• From Terminal Charts view, tap the Wx button.
A Weather popover for the selected airport displays.
If the weather data is expired, a weather warning appears in red in
the same location as the weather age. METAR and TAF updates
occur separately.
To manually update the weather data: