Chrysler 2012 300 - Uconnect Manual - Manual (Page 19)

Audio
1. Press the SETTINGS hard-key on the right side of the
unit.
2. Then scroll down and press the Audio soft-key to get
to the Audio menu.
3. The Audio Menu shows the following options for you
to customize your audio settings.
• Equalizer
Touch the Equalizer soft-key to adjust the Bass, Mid
and Treble. Use the + or - soft-key to adjust the
equalizer to your desired settings. Press the back
arrow soft-key when done.
• Balance/Fade
Touch the Balance/Fade soft-key to adjust the
sound from the speakers. Use the arrow soft-key to
adjust the sound level from the front and rear or
right and left side speakers. Touch the Center
ЉCЉ
soft-key to reset the balance and fade to the factory
setting. Press the back arrow soft-key when done.
• Speed Adjusted Volume
Touch the Speed Adjusted Volume soft-key to select
between OFF, 1, 2 or 3. This will decrease the radio
volume relative to a decrease in vehicle speed. Press
the back arrow soft-key when done.
4. Touch the Exit soft-key to exit from the Audio Menu.
18 Uconnect Touch™ 4.3 SYSTEM