Chrysler 2012 300 - Uconnect Manual - Manual (Page 91)

The sky view shows the satellites you are receiving. The
satellite signal-strength bars indicate the strength of each
satellite you are receiving. A solid bar indicates that the
GPS satellite is ready for use.
Dead Reckoning
Dead Reckoning technology uses the speed sensors at-
tached to your vehicle’s drivetrain and a gyroscope to
supplement the existing GPS data. The combined data
provides accurate positioning for your vehicle in tunnels,
indoor parking garages, urban canyons, and any other
area where GPS signals can become obstructed.
Creating and Editing Routes
This section describes how to create and customize your
routes.
Creating a New Custom Route
1. Touch Where To? (or Tools).
2. Touch Routes.
3. Touch New.
4. Touch Add New Start Point.
5. Find a location for your starting point, and touch
Select
.
NOTE: Perform Finding a Point of Interest procedure to
find your starting point.
6. Touch Add New Start Point.
7. Find a location for your ending point, and touch
Select
.
NOTE: Perform Finding a Point of Interest procedure to
find your ending point.
8. Touch + to add another location to your route. Touch
–
to remove a location.
9. Touch Next to calculate your route and view it on the
map. Touch Save to save your changes.
90 Uconnect Touch™ 8.4 SYSTEM