Chrysler 2012 300 - Uconnect Manual - Manual (Page 26)

Audio
Refer to Operating Instructions – Radio Mode for adjust-
ing the audio settings.
OPERATING INSTRUCTIONS – USB/iPod MODE
Overview
USB/iPod Mode is entered by either inserting a USB
Jump Drive or iPod cable into the USB port or by
touching the Player hard-key located left of the display.
Once in Player Mode, touch the source soft-key and select
USB/iPod.
Inserting USB/iPod Device
Gently insert the USB/iPod device into the USB Port. If
you insert a USB/iPod device with the ignition ON and
the radio ON, the unit will switch to USB/iPod mode and
begin to play when you insert the device. The display
will show the track number, and index time in minutes
and seconds. Play will begin at the start of track 1.
Seek Up/Down
Touch and release the right arrow soft-key for the next
selection on the USB/iPod device. Touch and release the
left arrow soft-key to return to the beginning of the
current selection, or return to the beginning of the
previous selection if the USB/iPod device is within the
first second of the current selection.
Fast Seek Up
Touch and hold the right arrow soft-key and the USB/
iPod device will begin to fast forward through the
current track until the soft-key is released.
Fast Seek Down
Touch and hold the left arrow soft-key and the USB/iPod
device will begin to rewind through the current track
until the soft-key is released.
2
Uconnect Touch™ 4.3 SYSTEM 25