Chrysler 2012 300 - Uconnect Manual - Manual (Page 71)

OPERATING INSTRUCTIONS – Bluetooth MODE
Overview
Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is
entered by pairing a Bluetooth device, containing music,
to the Uconnect Touch™ system.
Before proceeding, the Bluetooth device needs to be
paired through Uconnect™ Phone in order to communi-
cate with the Uconnect Touch™ System.
NOTE: See the pairing procedure in the Owner’s
Manual on the DVD for more details.
Once the Bluetooth device is paired to the Uconnect
Touch™ System, touch the Player soft-key located on the
bottom of the display. Once in Player Mode, touch the
source soft-key and select Bluetooth.
Seek Up/Down
Touch and release the right arrow soft-key for the next
selection on the Bluetooth device. Touch and release the
left arrow soft-key to return to the beginning of the
current selection, or return to the beginning of the
previous selection if the Bluetooth device is within the
first second of the current selection.
Fast Seek Up
Touch and hold the right arrow soft-key and the
Bluetooth device will begin to fast forward through the
current track until the soft-key is released.
Fast Seek Down
Touch and hold the left arrow soft-key and the Bluetooth
device will begin to rewind through the current track
until the soft-key is released.
Source
Touch the Source soft-key to select the desired audio
source, Disc, USB/iPod, SD Card, AUX or Bluetooth. This
screen will time out after a few seconds and return to the
main radio screen if no selection is made.
70 Uconnect Touch™ 8.4 SYSTEM