Keyless enter-n-go, To unlock from the driver or passenger side, To lock the vehicle – Dodge 2012 Journey - User Guide User Manual

Page 11: Getting started

Advertising
background image

WARNING!

• Do not start or run an engine in a closed garage or confined area. Exhaust gas

contains Carbon Monoxide (CO) which is odorless and colorless. Carbon
Monoxide is poisonous and can cause you or others to be severely injured or
killed when inhaled.

• Keep Key Fob transmitters away from children. Operation of the Remote Start

System, windows, door locks or other controls could cause you and others to
be severely injured or killed.

KEYLESS ENTER-N-GO

• The Keyless Enter-N-Go system is an enhancement to the vehicle's Key Fob. This

feature allows you to lock and unlock the vehicle's door(s) and liftgate without
having to press the Key Fob lock or unlock buttons, as well as starting and
stopping the vehicle with the press of a button.

To Unlock From The Driver or Passenger Side:

• With a valid Keyless Enter-N-Go Key

Fob located outside the vehicle and
within 5 ft (1.5m) of the driver or
passenger side door handle, grab either
front door handle to unlock the door
automatically.

To Lock the Vehicle:

• Both front door handles have LOCK

buttons located on the outside of the
handle. With one of the vehicle's
Keyless Enter-N-Go Key Fobs located
outside the vehicle and within 5 ft
(1.5m) of the driver's or passenger
front door handle, press the door
handle LOCK button to lock all four
doors and liftgate.

NOTE:
• If “Unlock All Doors 1st Press” is programmed all doors will unlock when you grab

hold of the front driver's door handle. To select between “Unlock Driver Door 1st

GETTING STARTED

9

Advertising