Dodge 2013 Dart - User Guide - Manual (Page 74)

Compass Calibration
• This compass is self-calibrating, which eliminates the need to set the compass manu-
ally. When the vehicle is new, the compass may appear erratic and the EVIC will display
“CAL” until the compass is calibrated.
• You may also calibrate the compass by completing one or more 360 degree turns (in an
area free from large metal or metallic objects) until the “CAL” message displayed in the
EVIC turns off. The compass will now function normally.
Programmable Features
• The EVIC can be used to view or change the following settings. Press the UP or DOWN
button until System Setup displays, then press the RIGHT button. Scroll through
the settings using the UP or DOWN buttons. Press the RIGHT button to change the
setting. Press the LEFT button to scroll back to a previous menu or sub menu.
• Radio Info • Trip Info
• Fuel Economy Info • Tire Pressure
• Cruise Control Info • Vehicle Info
• Digital Vehicle Speed • Stored Warning Messages
• Analog Vehicle Speed • Turn Menu OFF
EVIC Selectable Menu Items
• The following items can be selected in the EVIC menu.
Full Speedometer Analog Or Digital Display
• Full Speedometer Analog Display Icon.
• Full Speedometer Digital Display Icon.
• Press and release the UP or DOWN button until the Analog or Digital display icon
is highlighted in the EVIC. Press and release the RIGHT button to change the display
between analog and digital.
Vehicle Speed MPH/Km/h
• Press and release the UP or DOWN button until the Vehicle Speed icon is
highlighted in the EVIC. Press the RIGHT button to view a digital display of the current
speed in MPH or km/h. Pressing the RIGHT button a second time will toggle the unit
of measure between mph or km/h. Press the LEFT button to return to the main menu.
ELECTRONICS
72