Baumer HOG86 - Manual (Page 2)

Extremely robust.
Failsafe in any environment
The solid, extremely sturdy housing with minimum 10 mm wall
thickness is a prerequisite design benefi t in reliable encoder opera-
tion. Special anti-corrosion coating ensures seawater resistance in
compliance with C4 protection. Additional encapsulation will keep
the electronics safe against dirt, soiling and humidity even while the
connection cover is opened for installation.
Protected against bearing damages
Insulated bearings or optional hybrid bearings safely compensate
inductive shaft currents and prevent the electronics from damage by
voltage impacts up to 2,5 kV. Hybrid bearings excel by their outstan-
ding service life of 100 000 hours.
Safe at extreme temperatures
The encoder reliably endures temperatures from -40 to +100 °C in
long-term operation.
Capable of high shaft loads
Large, high-quality dual ball bearings compensate high radial and
axial shaft loads and will ensure ultimate longevity thanks to their
high load reserve potential.
Defying any environment
Specialised housing encapsulation and shaft seals enable longterm
IP 66 protection and will reliably prevent the encoder from damage
caused by penetration of dust, dirt or liquids.