Canon PIXMA MP830 - Manual (Page 143)

Chapter 9 141 Changing the Machine Settings
„ Power save setting
Specifies the time until Power saving is enabled.
You can select from <5 minutes>, <15 minutes>, <1 hour> or <8 hours>. The initial value is set
to <1 hour>.
„ Country select
Selects the country where you are using your machine.
„ Adjust contrast
Use this to adjust the contrast of the LCD if it is too low or too high.
„ Slide show setting
Specifies the image display quality of the slide show.
Language selection
Changes the language for LCD messages.
Reset setting
Reverts all settings you made to the machine since purchase back to default. However, some data
may not be erased, depending on the current usage state of your machine.
Save settings
Saves the settings for the Settings screen.
Load settings
Loads the settings for the Settings screen that were saved.
Note
This setting may not be available depending on the country of purchase.
Note
When <Image quality: Std> is selected, images are displayed at 5-second intervals. When
<Image quality: High> is selected, images are displayed at different time intervals according
to their resolutions.