Baumer PA210 - Manual (Page 18)

PA210
18 www.baumer.com
5 Technical data
Technical data - electrical ratings
Voltage supply Supplied by active current loop -
voltage drop <5 VDC
Display LED, 7-segment display (with 60 unit
stickers for front)
Number of digits 4-digits
Digit height 10 mm
Display range -1999...9999 („OuE“ to signal
overflow)
Display refresh 500 ms
A/D transformer Principle ∑∆
Resolution 16 bit
Measuring rate 62/s
Measuring accuracy ±(0.1 % +3 digit)
Temp. coeffic. 100 ppm/°C
Analog input Current input
Programmable Display range can be linearised
parameters Decimal point
Data memory >10 Jahre in EEPROM
Standard Protection class II
DIN EN 61010-1 Overvoltage category II
Pollution degree 2
Emitted interference DIN EN 61000-6-3
Interference immunity DIN EN 61000-6-2
Technical data - mechanical design
Ambient temperature
-10...+60 °C
Storing temperature -25...+85 °C
Relative humidity 95 % non-condensing
Connection Spring-loaded terminal connector,
detachable
Core cross-section 1 mm² (grid 2.54)
2.5 mm 2 (grid 7.62)
Protection DIN EN 60529 IP 65 (face)
Operation / keypad 3 softkeys below bezel
Housing type Built-in housing
Dimensions W x H x L 48 x 24 x 68 mm
Mounting Front panel installation by clip frame
Material Housing: Polycarbonate, UL94V-0
Weight approx. 50 g