Starting captureontouch before scanning – Canon P-150 User Manual
Page 18
Advertising
18
A
Click
on the taskbar, and click [Launch CaptureOnTouch].
B
Select whether to scan using [Scan First] or [Select Scan Job]
by clicking the respective tab.
[Scan First]
Documents placed in the scanner are scanned when you click [Start].
Select an output method after scanning is finished, and configure the
output settings to output the scanned images. (See
B and C on p. 17.)
[Select Scan Job]
Documents placed in the scanner are scanned when you select a job,
and then click [Start].
Scanned images are output automatically after scanning is finished.
Starting CaptureOnTouch Before Scanning
For details on operating CaptureOnTouch, refer to the User Manual
or the CaptureOnTouch Help.
Advertising