Canon P-150 - Manual (Page 24)

24
E
Close the feeder cover.
Make sure to reset the scanner’s internal counters using the following
procedure whenever you replace the feed roller and separation pad.
IMPORTANT
If you only use CaptureOnTouch Lite and have not installed
CaptureOnTouch and the scanner driver on your computer, you cannot reset
the counter using the following procedure. In this case, you can reset the
counter from CaptureOnTouch Lite. Refer to the User Guide for details.
A
Start Windows and log on as a user with administrator
privileges.
B
Set the Auto Start switch at the rear of the scanner to OFF.
C
Connect the scanner to the computer.
D
Open the feed tray to turn the scanner ON.
E
Click [Start], [All Programs], [Canon P-150], and then click
[Utility].
The Canon imageFORMULA utility starts.
F
Select [Canon P-150 USB], and click [Properties].
The scanner’s properties appear.
Resetting the Counters