Removal and replacement procedures, 1 disassembly sequence chart, Chapter – Compaq EP Series User Manual
Page 44: Emoval and, Eplacement, Rocedures
Compaq Deskpro EP Series of Personal Computers
4-1
chapter
4
R
EMOVAL AND
R
EPLACEMENT
P
ROCEDURES
This chapter provides general service information for the computer. Adherence to the
procedures and precautions described in this chapter is essential for proper service.
After completing all necessary removal and replacement procedures, run the Diagnostics
utility to verify that all components operate properly.
4.1
Disassembly Sequence Chart
Use the chart below to determine the disassembly sequence for removing components
from the computer.
4.9Subpanel and Bezel Blanks
4.10
4.11.1 Removing an Internal 3.5-Inch Hard Drive
4.11.2 Removing an External 5.25-Inch Drive
4.11.3 Removing an External 3.5-Inch Drive
4.13.3 Removing an Expansion Board
4.16.1 AGP Graphics Board Removal
4.16.2 AGP Graphics Memory Upgrade
4.17.1 Processor
4.17.2 Processor Guide Rails
4.18