FRIGIDAIRE FGHN2866PP - Manual (Page 16)

16
CONTROLS
Options may vary
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice
Increases the production of ice
water filter Press and hold for three seconds to reset after filter
change.
C/F Touch to toggle display from Fahrenheit to Celsius.
default settings Resets all refrigerator settings such as temp, temp
display and tones to their factory default settings.
Power on-off Press and hold for three seconds to turn off the cooling
system to clean the refrigerator. It also turns off the ice
maker. The temperature displays will read OFF.
Energy Saver Keep this switch set on energy saver (light on) for low-
est energy usage. If moisture appears on the cabinet
between the doors, pressing this button will turn the light
off and enable an electric heater used to reduce moisture
on the cabinet between the doors.
Setting cooling temperatures
Press the “∧” or “∨” indicator to adjust the temperature to the
desired setting.
The temperature display will begin to blink with the first touch. The
display will time out after 10 seconds and return to the basic display.
Alarms
Door Ajar
If the door has been left open for an extended period
of time, an alarm will sound and the door ajar indicator
will display on the bottom display of the control panel.
The alarm is turned off by closing the door. The mute
sounds key will blink to prompt the reset of any active
alarms. Press this key to reset any system alarms.
High Temp In the event of a high temperature condition, the
temperature display will blink and display “HI”. After
20 minutes, the alarm will sound and the high temp
indicator will be red on the bottom of the control panel.
The mute sounds icon will illuminate until pressed,
acknowledging the alarm, at which time the highest
temperature reached will be displayed and the refrigera-
tor will resume normal operation. In case the high temp
alarm is not acknowledged at the first alarm sound time
out, when the door is first opened, the alarm sound will
be repeated.
Power Fail In the event of a power failure, the power fail alert
will be displayed and the temperature display will blink
until the mute sounds icon is pressed, acknowledging
the alarm. Other modes may be turned off until the
alarm is acknowledged. The power fail alert is turned
off and the refrigerator will resume normal operation.
The high temp alarm may also be illuminated until a
safe operating range temperature has been reached.
IMPORTANT
Pressing the system on-off icon does not turn off power to your
refrigerator. You must unplug the power cord from the wall outlet.