FRIGIDAIRE FRS093LS1 - Manual (Page 16)

Time
DRY FUNCTION
Room
Temperature
Set temperature
Cooling Cooling Cooling
Fa
only
n
Fa
only
n
DRY operation
The dry mode will automatically
select the drying operation based on
the difference between the set
temperature and the actual room
temperature.
The temperature is regulated while
dehumidifying by repeating turning
on and off of the cooling operation
DRY.
operation lamp lights and the air
conditioner starts to operate in the
DRY mode. FAN SPEED is Low.
Push the ON/OFF button again to
stop this unit operation.
Due to the difference between the set
temperature of the unit and the actual
indoor temperature, the Air Conditioner
Air flow direction adjustment
Use SWING button to adjust the airflow direction up and down.
When SWING button is pressed, the horizontal louver moves up and
down automatically. Press again to stop operation.
If the louver oscillates or moves in a position that could affect the cooling or
heating(only for models with heating function) of the air conditioner, the direction
of the oscillation/movement would alter automatically.
How the air conditioner works
Attention
Attention
1. Press the MODE button to select
2. Press the TEMP button to set the
3. Press the ON/OFF button, the
in DRY mode will automatically switch
the operation modes between COOL
and FAN ONLY many times.
desired temperature from 70ºF to
82ºF.
. or fan only. The fan speed is mainly
LOW.
38