FRIGIDAIRE FRS093LS1 - Manual (Page 18)

To set the stopping time
1. Press the TIMER OFF button and the remote controller will show TIMER
OFF, the last set time for the stopping operation and the signal "h" will be
shown on the DIGITAL DISPLAY area. You are now ready to reset the time
for the stopping operation.
2. Push the TIMER OFF button again to set the time you want to stop the
operation.
3. After setting the TIMER OFF, there will be a one-half second delay before
the remote controller transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "h" disappears and the set
temperature will re-appear on the digital display.
Optimal operation
To achieve optimal performance, please note the following:
1. Adjust the air flow direction correctly so that it is not directed on people.
2. Adjust the temperature to achieve the highest comfort level. Do not adjust
the unit to excessive temperature levels.
3. Close doors and windows on COOL or HEAT(only for models with heating
4. Use TIMER ON button on the remote controller to select a time you want
to start your air conditioner.
5. Do not put any object near air inlet or air outlet, as the efficiency of the air
conditioner may be reduced and the air conditioner may stop running.
6. Clean the air filter periodically, otherwise cooling or heating(only for models
with heating function) performance may be reduced.
7. Do not operate unit with horizontal louvre in closed position.
How the air conditioner works
Exemples:
6h
(Timer On)
OFF
ON
6h
(Timer Off)
ON
OFF
12h
(Timer Off)
ON
OFF
ON
14h
(Timer On)
20h
(Timer On)
OFF
23h
(Timer Off)
OFF
ON
function)mode, or performance may be reduced.
40