FRIGIDAIRE FGEF3032MB - Manual (Page 16)

16
SETTING OVEN CONTROLS
The oven control is factory preset to display the oven
temperature with Fahrenheit (°F) values. The control may
be changed to display either Fahrenheit or Celsius
temperatures.
To change the temperature to display Celsius (°C) or
Fahrenheit (°F):
1. Press keypad. "— —" appears in the display.
2. Press and hold the keypad until "HI" appears in the
display.
3. Press and hold keypad until °F or °C appears in
the display.
4. Press the or keypad to change °F to °C or °C
to °F.
5. Press any keypad to return to normal operating mode.
1. Press and hold keypad for 5 seconds until a
tone sounds. " — — hr" will appear in display for
continuous cooking. The current time of day will return
to the display.
2. To cancel the continuous bake setting, press and hold
keypard for 5 seconds until a tone sounds.
"12hr" will appear in display indicating that the control
has returned to the 12-Hour Energy Saving feature.
NOTE
The temperature display mode cannot be changed when
the oven or self-clean is active.
Changing between continuous bake or 12-Hour Energy
savings mode does not change how the cooktop operates.
NOTE
To adjust the clock when the display is not flashing:
1. Press
keypad twice (do not hold keypad down).
"CLO" will appear in the display.
2. Within 5 seconds, adjust the time by pressing the
or and release the keypad when the correct time
displays. Any adjustments made will accept in 5 seconds.
Setting the clock
When the appliance is first powered up or when the power
supply to the appliance has been interrupted and restored,
the display will flash the time of day. Be sure to set the
clock with the correct time of day before using the oven.
NOTE
The clock cannot be set or adjusted when the oven is
active including self-clean.
Press and hold the keypad until the control beeps
once (about 7 seconds). This will block the controls from
sounding when a keypad is pressed in the future.
Setting for audible or silent keypad
operation
Normally a beep will sound each time a keypad is pressed.
If desired, the oven control may be set for silent keypad
operation.
When the control is set for silent keypad operation the
timer, preheat and any end of cycle or any error tone
alerts will remain audible.
NOTE
To set for silent operation:
To set for audible operation:
Press and hold the
keypad until the control beeps
once (about 7 seconds).
Changing temperature display mode
(°F or °C)
Changing to continuous bake setting:
Changing between continuous bake
setting or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven may be
programmed to override this feature for continuous baking.
To set the clock when the display is flashing:
1. Press
once. "CLO" will appear in the display.
2. Within 5 seconds, adjust the time by pressing the
or and release the keypad when the correct time
displays. The new setting will accept in 5 seconds.