User preferences – FRIGIDAIRE FGEF301DNW User Manual

Page 18

Advertising
background image

18

USER PREFERENCES

Í

NOTE

Each oven temperature can be individually adjusted.

The oven temperature adjustments made with this feature

will not change the Self-Clean cycle temperature or the

Broil temperature.
The oven temperature adjustments are permanent and

will stay forever in the unit memory unless you manually

change it again. Even a power outage will not reset

these changes. Follow the same procedure again if you

wish to change it to a different setting.

To adjust the oven temperature:
1. Press and hold upper or lower oven BAKE pad for 6

seconds. The preset adjustment number will appear

and "UPPER" or "LOWER" will fl ash in the display.

2. To increase the temperature use the

pad to enter the

desired change. The temperature may be increased as

much as 35°F (19°C). To decrease the temperature use

the pad to enter the desired change. The temperature

may be decreased as much as 35°F (19°C).

3. Wait 4 seconds to accept the temperature change and

the display will return to the time of day. Press CANCEL

pad to reject the change if necessary.

ADJUSTING OVEN OFFSET TEMPERATURE

The temperature in the oven has been pre-set at the

factory. When fi rst using the oven, be sure to follow recipe

times and temperatures. If you think the oven is cooking

too hot or too cool for the temperature you select, you

can adjust the actual oven temperature to be more or less

than what is displayed. Before adjusting, test a recipe by

using a temperature setting that is higher or lower than the

recommended temperature. The baking results should help

you to decide how much of an adjustment is needed.

SETTING LOCKOUT FEATURE

The pad controls the Oven Lockout feature. The Oven

Lockout feature automatically locks the oven doors (Self-

cleaning ovens only) and prevents the oven from being

turned on. It does not disable the display of the clock, the

minute timer or the interior oven lights.
To activate the Lockout feature:
Make sure the oven door is closed. Press and hold the oven
you want to lock pad for 3 seconds. After 3 seconds a

beep will sound, "DOOR", "LOCKED" will fl ash, "Loc" and

will appear in the display. Once the oven door is locked

the "DOOR" and "LOCKED" indicator will stop fl ashing and

remain in the display.

To reactivate normal operation:
Press and hold the oven you want to unlock pad for 3
seconds. A beep will sound. The oven icon, "LOC" and will

disappear from the display. "DOOR" and "LOCKED" will fl ash

in the display until the oven door has completely unlocked.

The appliance is again fully operational.

SETTING SILENT CONTROL OPERATION

The DELAY START pad controls the Silent Control Operation

feature. The Silent Control Operation feature allows the oven

control to be operated without sounds or beeps whenever

necessary. If desired the control can be programmed for

silent operation and later returned to operating with all the

normal sounds and beeps.

To change control from normal sound operation to

silent control operation:
1. Press and hold DELAY START pad for 6 seconds. A

beep will sound, "-- --" will appear, "DELAY" will fl ash

in the display. After 6 seconds, a beep will sound and
"SP" (speaker) or "- -" will appear in the display.

2. Press or

pad to switch between normal sound

operation and silent operation mode.

Note: If "SP" appears, the control will operate with normal

sounds and beeps. If "- -" appears, the control is in the

silent operation mode.

3. Wait 5 seconds to accept the change or press CANCEL

pad to reject the change.

Note: The control will always beep at the end of a minute

timer and will beep when a set temperature has been reached,

even if the control is set to silent operation.

Advertising
This manual is related to the following products: