Setting oven controls – FRIGIDAIRE FGGF304DLB User Manual

Page 16

Advertising
background image

16

setting oven controls

setting Quick PreHeat

The Quick PreHeat pad controls the Quick

Preheat

feature. Use this feature when using single rack baking

to quickly heat the oven to bake temperature. Use this

feature only for standard baking. A reminder tone will sound

indicating when to place the food in the oven.
The oven can be programmed to preheat at any temperature

between 170°F to 550°F.
To set the Quick Preheat temperature for 375°F
1. Arrange the interior oven racks.
2. Press uPPer oven or loWer oven to select oven.
3. Press Quick PreHeat. “350” will appear in the display.

If a preheat of 350°F is needed, press start.

4. Press 3 7 5.
5. Press start. “Pre” will be displayed while the oven is

preheating.

6. Press cancel when baking is complete or to cancel

the preheat feature.

note

When the oven is finished preheating Quick Preheat will

become just like the Bake feature and continue to bake

until cancelled. If you missed hearing the beep, you can

tell that the oven has reached preheat temperature if you

see the oven temperature showing in the oven display.

Once the oven has preheated, place food in the oven.

The preheat temperature can only be changed while the

Pre” message is displayed.

note

Fast cooking items like biscuits may require a few more

minutes then the recommended package time.

To change Preheat temperature while oven is

preheating (ex: changing from 375°F to 425°F)
If it is necessary to change the preheat temperature while

the oven is preheating to the original temperature:
1. Press uPPer oven or loWer oven to select oven.
2. While preheating, press Quick PreHeat. “375” will

appear in the display.

3. Enter the new preheat temperature. Press 4 2 5.
4. Press start. “Pre” will appear in the display.
Note: A beep will sound to remind you when to place the food

in the oven.

5. When baking is complete press cancel.

SETTING BAKE

The BAKE pad controls normal baking. If a rapid preheating

is preferred, refer to the Quick PreHeat feature for

instructions. The oven can be programmed to bake at any

temperature from 170°F to 550°F.
Baking Tips:
• Preheat your oven before using the bake mode.
• During preheat, the bake, broil elements and the con-

vection fan and element (lower oven only) are used in

cycle to quickly heat the oven.

• Use only one rack and center the pans as much as

possible on rack 6 in lower oven and rack 3 in upper

oven.

• If using two racks, place the oven racks in positions 3

and 8 in lower oven only.

• Allow 2” to 4” (5,1 to 10,2cm) around the utensil(s) for

proper air circulation.

• Be sure the pans do not touch each other, the door,

sides or back of the oven.

To set the Bake Temperature to 375°F
1. Arrange the interior oven racks.
2. Press uPPer oven or loWer oven to select oven.
3. Press BAKE, “350 will appear in the display. If a bake

of 350°F is needed, press start.

4. Press 3 7 5.
5. Press start. The actual temperature will be displayed.

A beep will sound once the oven temperature reaches

375°F and the display will show “375°”.

6. Place food in the oven.

note

Pressing cancel will stop the feature at any time.

To change the Bake Temperature

(example: changing from 375°F to 425°F)
1. Press uPPer oven or loWer oven to select oven.
2. After the oven has already been set to bake at 375°F

and the oven temperature needs to be changed to 425°F,

press BAKE and “375 will appear in the display.

3. Press 4 2 5. “BAKE” will continue to flash and “425°

will appear in the display.

4. Press start. The actual temperature will be

displayed.

Advertising
This manual is related to the following products: