Setting oven controls – FRIGIDAIRE FGGF304DLB User Manual

Page 18

Advertising
background image

18

setting oven controls

note

Pressing cancel will stop the feature at any time.

SETTING CONVECTION ROAST (lower oven

only)

This mode is best for cooking tender cuts of beef, lamb,

park and poultry. Use this mode when cooking speed

is desired. The Convection Roasting gently browns the

exterior and seals in the juices. Convection roasting uses

the convection fan to circulate the oven’s heat evenly and

continuously within the oven. The oven can be programmed

for Convection Roasting at any temperature between 300°F

to 550°F with a default temperature of 350°F.

Convection Roasting Tips:
• Use a broiler pan and grid, and a roasting rack (available

by mail order). The broiler pan will catch grease spills

and the grid will help prevent spatters. The roasting rack

will hold the meat.

• Place an oven rack on rack position 1.

• No preheat is needed in convection roast.

• Make sure the roasting rack is securely seated on the

grid in the broiler pan. The roasting rack fits on the grid

allowing the heated air to circulate under the food for even

cooking and helps to increase browning on the underside

(available by mail order only).

• There is no need to reduce the convection temperature or

to use the Convection Convert feature with this cooking

mode.

do not use the broiler pan without the grid or cover

the grid with aluminum foil (available by mail order).

• Always pull the rack out to the stop position before

removing food.

• Position food (fat side up) on the roasting rack.

To set a Convection Roast Temperature of 375°F:
1. Arrange oven racks and place food in the oven.
2. Press loWer oven to select oven.
3. Press convect; “350” will be displayed; “convect”

and “BAKE” will flash.

4. Press convect again; “350” will be displayed;

“convect” and “roast” will flash.

5. Enter the desired roasting temperature using the number

pads 3 7 5.

6. Press start; The actual oven temperature will be

displayed, “convect” and “roast”. The fan icon

will be displayed after 6 minutes.

setting convection convert (lower

oven only)

The Convection Convert pad is used to automatically convert

a standard baking recipe for convection baking. When

set properly, this feature is designed to display the actual

converted (reduced) temperature in the display. Convection

Convert may ONLY be used with a Convection Bake cooking

mode. It can be used with the features Delay Start and

Bake Time (see their sections for directions). If convection

conversion is used with the Bake Time and Delay Start

features, “cF” (check food) will be displayed when 75% of

the bake time complete. At this time the oven control will

sound 3 long beeps at regular intervals until baking had

finished. When the bake time has completely finished the

control will display

end

and beep at regular interval until

the cancel pad is pressed.

note

To use this feature with the BAKE TIME option, the

BAKE TIME pad must be pressed before the convect

convert pad.

To set the oven for Convection Bake with a standard

baking recipe temperature of 400°F:
1. Arrange interior oven racks.
2. Press loWer oven to select oven.
3. Press convect. “convect” and “BAKE” will flash

and “350” will appear in the display.

4. Press 4 0 0. “convect” and “BAKE” will keep flashing

and “400°” will appear in the display.

5. Press convect convert. As soon as the convection

convert pad is pressed, the oven will start heating. The

temperature displayed will be 25°F lower than what it

used to be. The actual oven temperature and the fan

icon will be displayed. A beep will sound once the oven

temperature reaches 375°F and the display will show

375°”, convect, BAKE”.

5. Place food in the oven.

note

The convection fan will start 6 minutes after the oven is

set for Convection Bake. The display will show an icon

of rotating fan within a square. This rotating fan icon

indicates when the Convection Fan is operating.

When using a Bake Time under 20 minutes, the

Convection Convert will not beep and display the “cF

message.
The upper oven is not equipped with a convection fan.

All the associated convection cooking features will not

be available in this oven.

Advertising
This manual is related to the following products: