Corega BTSHS01 - Manual (Page 10)

BTSHS01 User Manual
8 9
(3) Pairing
a. When Power is On, press and hold the pairing track wheel on the
stereo headset until the blue and red LEDs flash alternatively.
b. When Power is Off, press and hold the control button on the stereo
adapter until the blue and red LEDs flash alternatively.
c. When both headset and stereo adapter’s Blue LEDs start to flash
three times, then the pairing is completed.
*Note:
1. If pairing is unsuccessful, the stereo adapter has to be switched off
then repeat the step a and b until the pairing is successful.
2. One headset can only be paired with one stereo adapter each time.
3. If either the headset or adapter is switch off and switch back on
again, there is no need to repairing. Please press once on the round
control button of headset or stereo adapter to back on bluetooth
connection status.
4. To turn off the stereo adapter, press and hold the round button
until RED LED is blinking.
(4) Wearing Headset
Hold both sides of the headset  Hook the headset from the back
of head  Gently adjust headset position