Corega BTSHS01 - Manual (Page 11)

8
BTSHS01 User Manual
9
 
(5) Adjusting Volume
1. Adjusting Headset Volume
Press [Vol.+] to increase the volume, [Vol.-] to decrease the volume.
Vol+
Vol-
*Note: It is recommended to adjust headset volume once the pairing is
completed, since default volume may be slightly quiet.
2. Set volume mode
《Normal volume mode》
- When power is on, press and hold the control buttons on the stereo
adapter for 1.5 seconds to disconnect the stereo adapter from the
audio device. Then you will hear a ‘DoDo’ sound from the headset.
- Single clink on the control button will reconnect the stereo adapter
to the audio device ans set the stereo headset to normal volume
mode.
Single click 1.5 secondes