Acronis Access Advanced - Installation Guide - Manual (Page 117)

117 Copyright © Acronis International GmbH, 2002-2014
2. Stop the mobilEcho Management Server service.
3. Run the installer and press Next on the Welcome Screen.
4. Read and accept the license agreement.
5. Press Custom.
6. Select only the Gateway Server component and press Next.
7. Review the installation path and press Next. This should be the default.
8. Review the components which will be installed and press Install.
9. After the installation finishes, close the installer and start the configuration utility (if it doesn'
start automatically, it can generally be found at: C:\Program Files (x86)\Group
Logic\Configuration Utility).
10. For the Address field, specify the new IP you gave to your machine hosting mobilEcho.
11. For the Port field, specify the port number your mobilEcho File Server previously used (this
should be the default).
12. Press OK to complete the configuration and close the utility.
13. Open the Acronis Access web interface and login.
14. Expand the Mobile Access tab and open the Gateway Servers page.