Cabletron Systems Cabletron CyberSWITCH CSX400 User Manual
Page 208
MIB Navigator
194
CSX400 and CSX400-DC User’s Guide
netstat:
Syntax:
netstat <option>
Description:
The netstat command provides a display of general network statistics for
the managed device. The netstat command must be used with one of the
two display options.
Options:
-i
Display status and capability information for each interface
-r
Display routing information for each interface
Example:
ping:
Syntax:
ping [IP address]
Description:
The ping command generates an outbound ping request to check the
status (alive/not alive) of a device at a specified IP address.
Options:
Not Applicable
Example:
MIBNav-> netstat -i
Interface + Description
# 1 (ethernet -csmacd)
# 2 (ethernet - csmacd)
# 3 (ethernet - csmacd)
# 4 (ethernet - csmacd)
MTU
1514
1514
1514
1514
MAC Addr
0x00 0x00 0x1d 0x07 0x50 0x0e
0x00 0x00 0x1d 0x07 0x50 0x0f
0x00 0x00 0x1d 0x07 0x50 0x10
0x00 0x00 0x1d 0x07 0x50 0x11
Admin
up
up
up
up
MIBNav-> netstat -r
051470
Speed
10000000
10000000
10000000
10000000
Oper
up
up
up
up
Destination
# Default Route
# 134.141.0.0
# 134.141.0.0
Next-hop
DirectConnection
DirectConnection
DirectConnection
Interface
1
2
3
MIBNav-> ping 122.144.40.10
122.144.40.10 is alive
051471