Self-cleaning – FRIGIDAIRE FGEF302TNF User Manual

Page 24

Advertising
background image

24

Í

NOTE

The surface elements and the 2nd oven cannot be activated

when the Self-Clean feature is active (see the section:

The electronic surface element control).

SELF-CLEANING

Í

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN

multiple times to toggle between 2, 3 or 4 hours.

Í

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN

multiple times to toggle between 2, 3 or 4 hours.

Í

NOTE

Allow about 15 seconds for the oven door lock to close.

SETTING SELF-CLEAN CYCLE TIME LENGTH

The SELF CLEAN pad controls the Self-Cleaning feature.

If you are planning to use the oven directly after a self-

clean cycle remember to allow time for the oven to cool

down and the oven door to unlock. This normally takes

about one hour. So a 3 hour self-clean cycle will actually

take about 4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for

light soils, a 3 hour cycle for average soils, and a

4 hour cycle for heavy soils (to assure satisfactory

results).
To set the controls for a 3 hour Self-Cleaning cycle

to start immediately and shut off automatically

1. Be sure the clock is set with the correct time of day

and the oven door is closed.

2. Press

UPPER or LOWER to select oven.

3. Press

SELF CLEAN. "3:00" and CLn will show in

the display. The control will automatically clean for

a 3 hour period (default self-cleaning cycle time).

For the fi rst 10 seconds, “Remove Racks” will fl ash

and beep to remind you that the racks need to be

removed.

The SELF CLEAN and DELAY START pads controls the

Delayed Self-Clean operation. The automatic timer will turn

the oven on and off at the time you select in advance.
To set the control for the Self-Cleaning Cycle to

start at a delayed time and shut off automatically

(example: 3 hour self-clean cycle to start at 4:30)

1. Be sure the clock is set with the correct time of day

and the oven door is closed.

2. Press

UPPER or LOWER to select oven.

3. Press

SELF CLEAN. "3:00" and CLn will show in

the display. The control will automatically clean for

a 3 hour period. For the fi rst 10 seconds, "Remove

Racks" will fl ash and beep to remind you that the

racks need to be removed.

4. Press

START. The "DOOR" icon will fl ash.

5. As soon as the control is set, the motor driven oven

door lock will begin to close automatically. Once the

door has been locked the "DOOR" indicator light will
quit fl ashing and remain on and the icon will appear.

6. Press

DELAY START. Enter the desired start time

using the number pads 4 3 0.

7. Press

START. "DELAY", "DOOR LOCKED" and

"CLEAN" icons will remain on.

8. The control will start the self-cleaning at the set start

time, for the period of time previously selected. At

that time, the icon "DELAY" will go out; "CLn" and

oven icon will appear in the display.

When the Self-Clean Cycle is Completed

1. "HOT" will appear in the display. The time of day, the

"DOOR" and icon will remain in the display.

2. Once the oven has cooled down for approximately 1

HOUR, and the "DOOR" is no longer displayed, the

oven door can then be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-

cleaning cycle due to excessive smoke or fi re in the oven:

1. Press

CLEAR.

2. The oven door can only be opened after the oven

has cooled down for approximately 1 HOUR and the
"DOOR" and icons are no longer displayed.

4. Press

START. The "DOOR" icon will fl ash.

5. As soon as the control is set, the motor driven oven

door lock will begin to close automatically. Once the

door has been locked the "DOOR" indicator light
will stop fl ashing and remain on and the icon will

appear. Also, the oven icon will appear in the display.

When the Self-Clean Cycle is Completed

1. "HOT" will appear in the display. The time of day, the

"DOOR" and icon will remain in the display.

2. Once the oven has cooled down for approximately 1

HOUR, and the "DOOR" is no longer displayed, the

oven door can then be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-

cleaning cycle due to excessive smoke or fi re in the oven:

1. Press

CLEAR.

2. The oven door can only be opened after the oven

has cooled down for approximately 1 HOUR and the
"DOOR" and icons are no longer displayed.

Advertising