FRIGIDAIRE FHPC4260LS - Manual (Page 9)

9
Step 2:
• Mount the upper bracket (4) onto the ceiling with 4
sets of long screws (10) and washers (11) (fig. ).
• Make sure the power cable for the range hood is
routed inside the bracket.
• Depending on the ceiling height ensure required
power cable length. See the table and fig.
below for reference.
Ceiling height
8 feet 9 feet 10 feet
Power
cable
length
3.3 feet 4.3 feet 3.3 feet
Power cord
Step 3:
• Mount the glass cover (2) onto the range hood (1).
Use the allen key (16) to secure it with 4 sets of
bolts, rubber washers, and washers (9) (fig.
).
Step 4:
• Attach the collar (6) to the range hood (1). Secure
it with 2 short screws (19) (fig. ).
Step 5:
• Place the exhaust duct onto the collar (6) and
secure it with duct tape (not provided) (fig. ).
Installing the hood
NOTE
Sometimes, sponge tape covers the holes. If the
holes are located behind the sponge tape, simply
insert the screw through the sponge tape.