FRIGIDAIRE FGHD2465NB - Manual (Page 8)

8
OPERATING INSTRUCTIONS
Status Indicator Lights
The CLEAN light will come on at end of cycle and remain
on until door is opened.
When the Sanitize option is selected and the criteria is
met, the Sanitized indicator will display upon cycle
completion and remain on until the door is opened. If
the sanitization criteria is not achieved, the indicator will
not display. This can happen if the cycle is interrupted or
if the sanitization temperature could not be reached due
to incoming water temperature signigicantly below 120
o F.
The WASHING light comes on at the beginning of cycle
and remains on throughout the wash and rinse phases
of the cycle.
PF……………… Appears in window when
dishwasher is first installed, or
when power has been
interrupted. HI-TEMP WASH
and NO HEAT DRY indicator
lights will also flash. To clear,
touch START/CANCEL pad.
1H-24H……….. Number of delay start hours.
The last hour will count down
in minutes.
CL……………… Close dishwasher door. The
status indicator lights will also
flash to indicate current cycle
status.
HO or Hd…..… Indicate a water heat delay.
MINUTES…...… Number of minutes left in cycle
(1-99). If cycle is longer than
99 minutes, a small plus sign
will appear beside the number
of minutes and remain on until
time counts below 99.
The DRYING light indicates the drying portion of the
cycle. When either drying option is selected.
In the unlikely event the dishwasher malfunctions, the
indicator may display one of the following codes "Er",
"uF", "uo", or "CE". If one of these codes are displayed
contact the Frigidaire Customer Care Center at
1-
800-944-9044
They will be able to provide
assistance in troubleshooting the problem and/or
locating an authorized service technician, if needed.
NOTE
The time remaining suddenly increase or drop several
minutes. This means that the dishwasher received input
form the Smart Sensor concerning the soil load and has
automatically adjusted the cycle length.
Sanitze Indicator