Planning, Plan the electrical connection – FRIGIDAIRE FH30DD50MS User Manual

Page 8

Advertising
background image

8

Plan the Electrical Connection

The downdraft blower system draws 2.8 AMPS and requires

a 120 VAC, 60 Hz circuit.
The unit has a 28 inches long power cord with a 3 pronged

plug. Plan to provide a grounded outlet in a location which

will allow the unit’s power cord to reach.

PLANNING

NOTE

If the 30” model is being installed in a 30” wide cabinet

or the 36” model in a 36” wide cabinet, the outlet cannot

be located on the back wall of cabinet.
Outlet may also be wall-mounted with access hole in

cabinet.

Recommended Electrical

Outlet Locations

(All Shaded Areas)

All vertical dimensions relative to top surface of the countertop.
All horizontal dimensions relative to cutout in the countertop.
Ensure that access to the electrical outlet will not be blocked by

the ducting after installation.

Electrical Outlet Location

Model

M - From Center

FH30DD50MS

13 ½” (34.3 cm)

FH36DD50MS

16 ½” (42.0 cm)

7-7/8”

(20 cm)

8-3/4”

(22.2 cm)

M

M

6-1/2”

(16.5 cm)

19-1/16”

(48.4 cm)

23-3/4”

(60.3 cm)

4-5/8"

(11.8 cm)

9-1/2"

(24.1cm)

14-3/4"

(37.5 cm)

22-1/8"

(56.2 cm)

Advertising
This manual is related to the following products: