FRIGIDAIRE FARE1011MW - Manual (Page 7)

7
OPERATING INSTRUCTIONS
This manual covers many models and not all cycles, options, or features listed are available on every model. Consoles shown above
for reference only. Your model may differ.
Turn the cycle selector in either direction to the cycle
desired.
Once a cycle is running, turning the selector knob to
another selection will not change the cycle. If cycle
selection change is attempted after the cycle starts, the
indicator lights will fl ash and a signal will beep, but the
original cycle will continue.
Cycle Selection
Follow the fabric care label
instructions on items
to be dried.
For best results
Í NOTE
To change the cycle selection once the cycle has
begun, push in and hold the cycle selector knob to
cancel the current cycle, make the new selection and
push in the selector knob again to restart the dryer.