Casablanca Fan Company Panama Halo 66HXXF - Manual (Page 8)

8
The W-81 wall control provides separate control of fan and light with two separate
knobs from a convenient wall location. The W-81 is designed to replace a standard
wall switch and wall boxes with a depth of 2” or greater. Requires two hot leads from
wall box to ceiling wiring box.
To install a W-81 wall control in place of an existing
wall switch, follow the instructions on the W-81 package.
Operation of the fan from the wall switch is simple:
1. Turn the upper knob to the desired fan speed.
2. Turn the lower knob to the desired light setting.
4 - SPEED OPTIONAL WALL CONTROL W-81
CAUTION! Failure to set the pull-chain speed to HIGH can result in
faulty operation of the fan and damage to the W-81 wall control. To
confirm fan is set to HIGH: TurnW-81 fan speed switch to ‘HI’ - set
fastest fan speed with pull chain.
• The W-41 allows the choice of four (4)
different speed settings.
• No light fixture is used.
• Set the FAN pull chain switch to the
HIGH speed setting.
• No changes in household or fan wiring
are required.
• The fan may be turned ON and OFF by
the W-41 wall control.
4 - SPEED W-41 WALL CONTROL OF ThE FAN
4 - SPEED W-81 WALL CONTROL OF ThE FAN & LIGhT
CAUTION! Failure to set the pull-chain speed
to HIGH can result in faulty operation of the
fan and damage to the W-41 wall control.
To confirm fan is set to HIGH: TurnW-41 fan
speed switch to ‘HI’ - set fastest fan speed
with pull chain.
• The fan may be turned ON and OFF
by the W-81 wall control.
• The lights may be turned ON and
OFF by the W-81 and the intensity
adjusted from low to high.
• The fan must be supplied with
two independent 120V AC supply
wires.
• Set the FAN pull chain switch to
the HIGH speed setting.
• Turn the lights ON at the fan.
• The W-81 allows the choice of four
(4) different speed settings.
CAUTION! Failure to set the pull-chain speed
to HIGH can result in faulty operation of the
fan and damage to the W-81 wall control.
To confirm fan is set to HIGH: TurnW-81 fan
speed switch to ‘HI’ - set fastest fan speed
with pull chain.
OFF
LO
MED
MED
HI
HI
OFF MAX
R