Abbingdon Music Research CD-77 Reference Class - Manual (Page 22)

22
As a specialised
transport, the CD-77
runs jitterless
vi. Go to Control Panel > Sounds and Audio Devices > Audio. Make sure USB Audio Device
is selected as the default device under the Sound playback box.
vii. Select playback music software on the personal computer (Apple iTunes®, Foobar®,
J.R iver Media Centre/Media Jukebox, Winamp®, Windows Media Center® et al).
4.2 Transport output (RC-77 only)
The CD-77 with its S/P-DIF connections may be used as a transport (via the output) or as a standalone DAC (via
the input).
With the CD-77 in Standby mode, connect the desired interconnect cable from the S/P-DIF output of the CD-77 to
the desired external DAC. Then power on and press the DAC button (RC4) on the RC-77 to select:
SOURCE
Activate the CD-77 before powering up the external DAC to ensure the signal is detected.
You are now ready to commence CD playback using the CD-77 as a dedicated transport.