8 setting your personal ringing tones – Vertical Communications Impact SCS 8212S User Manual

Page 50

Advertising
background image

To set a permanent speaker, headset, handset, or group listening
loudness for all future calls,

1. Press INTERCOM.

2. Activate speaker, headset, handset, or group listen mode to be

affected.

3. While in that mode, press VOLUME UP or VOLUME DOWN to

adjust loudness.

4. Dial ✳ ✳ 7 or press a preprogrammed VOLSV button to hold the

loudness at the last setting for all future calls (until you change the
default again).

5. Repeat this procedure in each mode until you’ve set all default

volume levels.

7.8

Setting Your Personal Ringing Tones

You can choose one of six different ring tones for your telephone. Often,
when several telephones are located close together, each user chooses a
different personal ring tone.

To select one of the ring tones, proceed as follows:

1. Press INTERCOM.

2. Dial ✳✳ 4.

3. Dial number (1–6) to select ring tone.

4. The next time your telephone rings, you will hear the new ring

tone.

Using The Other Telephone Features

GCA70–313

7 – 8 Station User's Guide

Advertising
This manual is related to the following products: