Vertical Communications Impact SCS 8212S - Manual (Page 54)

8.2 Lighting The Message-Waiting Light
•
To turn on the message-waiting light (and a broken dial tone) at
an idle telephone,
1. Press INTERCOM.
2. Dial ✳ 3.
3. Dial extension number of station you wish to alert.
The message-waiting light of that station will flash.
•
To turn off the message waiting light at a busy or idle station,
1. Press INTERCOM.
2. Dial # 3.
3. Dial extension number of station that was alerted. The
message-waiting light of called station will turn off.
•
To turn off the message waiting light during message-delivering
conversation,
1. Press INTERCOM; once if off-hook, twice if on-hook.
NOTE: If the message-waiting light can only be turned off by either
the person sending the message or the person receiving the
message.
Programming Your Telephone GCA70–313
8 – 2 Station User's Guide