Chauvet Work Light - Manual (Page 12)

Setup
-8- COLORado™ 2 Tour User Manual Rev. 02b
Mounting Read the safety notes at the beginning of this guide and follow their recommendations
before mounting this product.
Orientation
Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation.
Make sure to mount this fixture away from any flammable material as indicated in the
Safety Notes.
Rigging
CHAUVET® recommends following the general guidelines below when mounting the
COLORado™ 2 Tour.
• When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
• Never mount the fixture in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
• Make sure that the location where you are mounting the fixture can support its
weight. Please see the Technical Specifications section of this manual for the
weight requirement of this fixture.
Procedure
This fixture includes a mounting yoke to which you can attach one or two rigging
clamps. You must supply your own “C” or “O” clamps and make sure that they are
capable of supporting the weight of this fixture. CHAUVET® recommends using at least
two mounting points per fixture.
Product Mounting
Diagram
Hanging
Floor Mount
Clamp (not included)