ClearSounds AMPLIFIED FREEDOM PHONE CSC600D - Manual (Page 18)

18 – ENGLISH
on the right side of the phone to increase or decrease the
volume while the phone is ringing.
Note:
If you set the volume to “OFF”, when a call comes in,
only the New Call information appears on the LCD and the
phone will not ring.
Other Ringer Alert Options: Strobe & Shaker / Only Shaker
/ Only Strobe (located on the rear of the base)
Your telephone incorporates several options to alert you that
the phone is ringing. The loud, adjustable ringer as well as
the bright strobe and optional bed shaker or any combination
of these allows you to customize the phone to fit your needs.
Your phone is equipped with a bright strobe light that can
flash a very bright strobe when the phone rings. If you have
selected the strobe to be ON, it will flash on all volume
levels.
Your phone is equipped with a 3.5mm vibrating alert jack for
an optional bed shaker (purchased separately) to alert you
when the phone is ringing. Simply plug it into the shaker jack
and place it between your mattress and box spring or under
the cushion of a chair. When the phone rings, the pad will
vibrate with each ring of the phone.
NOTE:
Your ClearSounds® CSC600D comes from the factory
preset to both Strobe & Shaker ON position. If you would like
to override the factory preset, simply change the selection on
the rear of the phone.
█ Using your Visual Indicator
The red flashing visual indicator on the base will flash to alert
you to new calls received or if you have a voice mail message
waiting from your service provider. To turn this feature OFF,
see page 32.
█ Using your Phone with Hearing Aids and
Cochlear Implants
Your phone can be used with hearing aids and cochlear
implants equipped with a telecoil (T-coil). Adjust your