ClearSounds AMPLIFIED FREEDOM PHONE CSC600D - Manual (Page 32)

32 – ENGLISH
█ Reviewing Voice Mail Messages
You must subscribe to Voice Mail from your phone service
provider to use this feature.
When a voice mail message is left, the screen will display
“New voice mail” and the message will be saved as a call.
If you have new messages, you will hear a stutter dial tone
when you pick up the handset. The CSC600D has a message
indicator light, which will blink when you have new messages
and will continue to flash until the message has been
retrieved. You can utilize the one-touch voice mail button if
you have programmed your voice mail access phone number.
Follow the steps provided from your phone provider to listen
to your message(s).
If you want to delete the “New voice mail” text on your LCD,
press the ▲ in standby mode and then press and hold the
key.
Note: You may permanently turn off the red flashing visual
indicator for both message waiting and new calls by simply
setting the indicator to the OFF position (this switch is
located on the underside of the telephone.
Reminder:
Press the Back or Exit soft key from any menu to
return to the previous screen. Otherwise, after 60 seconds,
the phone will automatically return to the main screen from
any menu if no key is pressed.
In order to utilize the Caller ID features, you must subscribe
to Caller ID service through you local phone service provider.
There are fees for Caller ID services, and it may not be
available in all areas. This product can provide information
only if both you and the caller are in areas offering Caller
ID service and both phone service providers use compatible
equipment.
CALLER ID (CID) OPERATION