Crosley Radio CR2401A - Manual (Page 4)

43 Power Button
44 Eject Button
45 Program Button
46 Random Button
47 Repeat Button
48 Tuning Down Button
49 FIND Button
50 Backward Skip
51 Stop Button
52 Folder+ Button
53 Record Button
54 Split Track Button
55 Erase Button
56 Band Button(AM/FM)
57 Finalize Button
58 0-9, 10+ Button
59 Mute Button
60 Tuning Up Button
61 Play/CD Pause Button
62 Forward Skip
63 Folder- Button
64 Mono/Stereo Button
65 EQ Button
66 Function Button
67 Volume Down
68 Volume Up
Random Play
Programmed Playback
Repeat Playback
Playing a CD
1
While playing a CD, press the RANDOM button
(46) on the remote control. “Rand” will show on
the LCD display. The unit will randomly select
songs from the CD.
2
To cancel Random playback, press the
RANDOM button (46) again.
1
Make sure the CD is stopped.
2
Press the PROGRAM button (5/45).
" 01" will shown on the display.
3
Press the (20/62) or (21/50) buttons
to select a desired track.
4
Press the PROGRAM button (5/45) twice to
store the selected track number.
5
Repeat above steps 3 and 4 to program
additional tracks into memory.
NOTE: Maximum of 99 tracks can be programmed
into memory.
1
Press the FUNCTION button (2/66) to set the
unit to CD mode.
2
Press the EJECT button (16/44) to open the CD
drawer. Insert a CD into the tray with the label
side facing up.
3
Press the EJECT button (16/44) again to close
the CD drawer. The display will show “CD Load”
for a few seconds and playback will automatically
begin.
4
To skip forwards or backwards through the tracks
on a CD, press the (20/62) or (21/50)
buttons.
5
To fast forward or rewind through a track, press
and hold the (20) or (21) buttons on the
control panel. Release the buttons once you
reach the desired position on the track. To use
the remote to fast forward or rewind, press the
(60) or (48) button one time. Once the
desired position is reached, press the button
again to resume play.
1
To repeat a single track, select the desired track
number and press the REPEAT button (47)
once. Press the PLAY button. "Repeat one" will
show on the display and the selected track will
repeat once it is finished.
2
To repeat a whole CD, press the REPEAT button
(47) twice. The display will show "Repeat All".
Once the disc is finished, it will start over again
from the beginning.
3
To turn off the repeat feature, press the REPEAT
button (47) again. The repeat display will
disappear from the LCD.
CD Operation
POWER
EJECT
REPEAT
FIND
REC
ERASE
FINALIZE
1
4
7
0
2
5
8
10+
3
6
9
MUTE
BAND
MO/ST
TRACK
SPLIT
VOL -
EQ
PROGRAM
FUNCTION
VOL +
RANDOM
FOLDER
+
FOLDER -
9 6
Control Locators
37 AC Power Cord
38 FM Wire Antenna
39 Line In Jack
40 Line Out Jack
41 USB Jack
42 Adapter For 45 rpm Records
Remote Controls
Unit Controls
37
38
43
44
45
46
47
49
51
48
53
55
52
57
56
50
54
59
60
62
61
63
64
65
66
67
68
58
39 40 41
42