CDVI PROMI 1000 - Manual (Page 14)

Edition 10/2003
14
Press 1 to authorize the access for the selected user number (cardholder) or press 0 to deny ac-
cess for the selected user number during the holidays.
The LED lights on in green
Then press #. The PROMI 1000 returns to the main menu
OR
Press * to authorize the access to all the cardholder
Press # to confirm and wait 5s until the new configuration is set for all the cardholder.
The LED lights on in green
OR
Press # to deny access to all the cardholder during the holiday periods
Press # to confirm your choice and wait 5 seconds until the new configuration is set for all the
cardholder.
The green LED lights on
Then press #. The PROMI 1000 returns to the main menu
Q. Exit from programming
You must be in the main menu to exit from programming, press #
Once you exit from programming the PROMI 1000 is on stand-by the LED flashes in orange.
III. OPERATING INSTRUCTIONS
The key-in time between two digit is set at 10 seconds. Behond that time the data computed
is canceled.
A. Reset
Place the ST1 jumper in 2-3 position.
The LED flashes in green during 5 seconds. The default master code is restored to 12345.
# Exit
O2
G1
O1
O1
V1
V1
O1
O1
Press # to go back
to the Main MENU
Press # to go back
to the Main MENU