CDVI PROMI 1000 - Manual (Page 6)

Edition 10/2003
6
II. PROGRAMMING
A. Colors and audible signals
The letter in bolt represents the LED color.
(O for orange, G for green and R for red)
the digit represents the number of beep emitted.
The LED turns green and the 1 beep is emitted.
The LED turns Red and 1 beep is emitted.
B. Main menu
Important: Refer to the one page programming
Enter the master code twice (12345 default). The LED turns on to orange
and 2 audible beeps are emitted.
A time delay of 2 minutes is set before the main menu is being shut down.
Once in the main menu, the LED lights on in orange.
Enter the 2-digit number of the menu to select a menu (from 00 to 13 )
Once you enter in the menu, the LED lights in red.
Press on the # to exit from programming.
C. Menu 00 – Program badges and Pin codes
Press 00 to enter in badge & Pin code programming menu. The badges and Pin codes are stored in
a slot (pigeon hole) defined as a user number.
Once in the badge programming menu, an automatic search is launch to select the next available
user number.
Once a free user number is selected the LED lights on in Green
Enter the master
code twice
O2
O2
G1
R1
R1
G1