Cabletron Systems DLE22-MA - Manual (Page 155)

The Interface Statistics Screen
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-91
Frames Frwded (Read-Only)
Displays the number of frames forwarded by the interface.
[1-12], [13-24], or [25-26] (DLE2X-MA), [25] (DLE3X-MA) (Selectable)
When the Switch Statistics is displayed, the statistics are displayed for the
first 12 ports. These fields allow the user to step to a second or third
screen for the same type of information for ports 13 through 24 or ports
25 and 26 of the DLE2X-MA and port 25 (HSIM) of the DLE3X-MA.
While on the second or third screen, the user can navigate back to earlier
screens by highlighting the [1-12] and/or [13-24] fields and pressing
ENTER.
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to Section 5.28.1.
5.28.1 Using the Clear Counters Command
To reset all the statistics counters to zero, perform the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS field.
2. Press ENTER, the counters for the selected port are reset to zero.
5.29 THE INTERFACE STATISTICS SCREEN
The Interface Statistics screen is used to gather MIB-II statistics for all of
the DLE2X-MA and DLE3X-MA interfaces (ports 1 through 24 and Fast
Ethernet Interface Modules and all backplane interfaces) with the
exception of an HSIM installed in the DLE3X-MA.
Access the Interface Statistics screen by using the arrow keys to highlight
the INTERFACE STATISTICS menu item on the Module Statistics
Menu screen and pressing ENTER. The Interface Statistics screen,
Figure 5-34, displays.
The MultiSwitch HSIMs gather their own statistics, and may be
viewed via the Local Management screens of the applicable
HSIM. Refer to your HSIM documentation for information on
how to access these screens.