ClearOne comm Flexible Camera - Manual (Page 3)

Flexible Camera Series — Introduction 3
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Flexible Camera Series — Introduction 2
Important safeguards
Before operating a camera, please read the entire manual thoroughly.
• Use only the wall mount power supply provided. Using a different power supply may cause
the camera to malfunction or may damage the camera
• Do not operate the camera if the power cord is damaged or if the camera has been dropped
or damaged. A qualified service technician must examine the camera before operating.
• Position the cord so that it will not be tripped over, pulled on or come into contact with hot
surfaces.
• Always unplug the camera from the electrical outlet before cleaning or servicing.
• To reduce the risk of electric shock, do not immerse in water or other liquids.
Handling the camera
• All ClearOne cameras are for indoor use only.
• Do not use cameras next to food or beverages. Cameras have been tested and approved for
use in chemistry labs. However, be careful not to spill liquid or dry chemicals or solvents on
the camera.
• Do not use cameras right next to working TVs, radios, motors, transformers or magnetic
fields.
• Avoid touching the lens. To clear any dust, blow pressurized air onto the lens. Clean smears
or smudges by wiping with a lens cleaning cloth.
• Clean exterior of camera with a clean, damp cloth; do not use any abrasive
chemicals.
• Use both hands whenever adjusting the neck of the camera; this will avoid any unnecessary
strain on the camera base and will keep the camera from tipping over.
• Do not attempt to take the camera apart. There are no user-serviceable components inside.
• Do not direct the lens of the camera toward the sun. This may damage the camera.
• Do not store or operate the camera under the following conditions:
~ Outdoors or connected to outdoor or auxiliary power sources.
~ In environments with high humidity.
~ In inclement weather.
~ Under severe vibration.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Unpacking
Carefully remove the camera, cables and power supply from the packaging. Ensure you have
received all items by referencing the descriptions provided for your specific camera.
If any parts are missing, please call the Technical Support Group at
1-800-283-5936 (USA) or 1-801-974-3760.
Note: ClearOne is not responsible for product damage incurred during shipment. You must
make claims directly with the carrier. Inspect your shipment carefully for obvious signs of
damage. If the shipment appears damaged, retain the original boxes and packing material
for inspection by the carrier. Contact your carrier immediately.
FlexCam™
This full-motion analog camera can be used to take color pictures, make color movies, and
view three-dimensional objects, documents and photographs. It’s also ideal for
videoconferencing and comes standard with a 5.57 mm, D-mount lens.
FlexCam
User Manual S-Video to
Composite Adapter
6' Connector Cable
with S-Video connector Focus Ring
12 VDC Power Plug
Figure 1. FlexCam and accessories