Clarion P200 - Manual (Page 32)

Chapter 2: Installation
32
1. Plug the vehicle power cord into the DC IN
socket on the cradle.
Back of the cradle
2. Plug the other end of the cord into the cigarette
lighter socket of your vehicle.
3. Briefly press the power button.
You are ready to use the N.I.C.E. P200 for
navigation.
DC IN
L=8.0Max
DC IN socket
Removing the mounting bracket
1. Disconnect the vehicle power cord from the DC
IN socket on the cradle.
2. Hold the mounting bracket and cradle as you lift
the compression lever.
Mounting bracket mounted on windshield
3. If the mounting bracket and cradle do not drop
away from the windshield, gently pull the
suction tab away from the glass.
Suction tab at
base of cup
Compression lever