Harbor Freight Tools Model 93289 - Manual (Page 6)

Page 6 SKU 93289 For technical questions, please call 1-800-444-3353.
NOTE: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU-
TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE
IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACE-
MENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT
BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR
HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARIS-
ING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List
Part No. Description
1 Fluid Nozzle
2 Lock Ring
3 Air Tube
4 Material Tube
5 Gun Body
6 Bolt
7 0-ring
8 0-ring
9 Air Valve Rod
10 Spring
11 Air Valve Set
12 Trigger
13 Trigger Pin
14 Air Inlet
15 Suction Tube
16 Cup
Maintenance
1. After each use, empty the Cup (16) of any remaining cleaner. Store the fluid in its
original container, or dispose of it in accordance with local hazardous waste proce-
dures. Fill the Cup (16) with warm water, set the air compressor to 20 PSI, and connect
to the air source hose to the Spray Gun. Point the Spray Gun into a waste bucket and
run the entire Cup of warm water through the gun. If the discharged water still smells
strongly of the cleaner you used, repeat the process.
2. Wipe down the unit with a lint free cloth.