Chauvet Model ST-200 - Manual (Page 6)

Setup
ST-200 User Manual 6 Revision: 2004-11-02/11:23
Figure 1 - Hanging Bracket
Note!
Clamp is sold separately.
Mounting
O R I E N T A T I O N
This fixture may be mounted in any position provided there is adequate room for ventilation. It is also
possible to stand this fixture using the removable feet provided.
R I G G I N G
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the
fixture by loosening both knobs and tilting the fixture. After finding
the desired position, retighten both knobs.
• When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
•
Safety cables should always be used.
• Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
Using a Color Gel
The ST-200 is equipped with a detachable clear front cover that doubles as a gel holder as illustrated
below.
1) Open the clear lamp cover by removing the thumbscrew.
2) Cut a piece of gel filter to match the size of the cover or slightly
larger. The size of the gel used in the illustration was a 6.5” by
6.5”.
3) Lay the gel over the opening, close cover and replace the
thumbscrew securely.