Cobalt Networks 9084 - Manual (Page 33)

9084-OM (V4.0) 9084 PRODUCT MANUAL 3-9
Operating Instructions
Control and Display Descriptions
Cobalt ® Remote Control Panel User Interfaces
(See Figure 3-6.) Similar to the function submenu tabs using DashBoard™,
the Remote Control Panels have a Select Submenu key that is used to display
a list of function submenus. From this list, a control knob on the Control
Panel is used to select a function from the list of displayed function submenu
items.
When the desired function submenu is selected, each parametric control or
selection list item associated with the function is displayed. Scalar (numeric)
parametric values can then be adjusted as desired using the control knobs,
which act as potentiometers. Items in a list can then be selected using the
control knobs which correspondingly act as rotary switches. (In this manner,
the setting effected using controls and selection lists displayed on the Control
Panel are comparable to the submenu items accessed and committed using the
9084 card edge controls.)
Figure 3-6 shows accessing a function submenu and its parameters (in this
example, “Color Corrector”) using the Control Panel as compared to using the
card edge controls.
Note: Refer to “OGCP-9000 Remote Control Panel Product Manual” (PN
OGCP-9000-OM) or “OGCP-9000/CC Remote Control Panel Product Man-
ual” (PN OGCP-9000/CC-OM) for complete instructions on using the Control
Panels.
Figure 3-6 Control Panel Setup of Example Video Proc Function
Color Corrector function
(among others) is
accessed using the Control
Panel Select Submenu
key. Color Corrector
function is selected from
the list of functions
(submenu items)
CC3_3440AA.JPG
CC3_3420CCB.JPG
1 2 3
ClrC
Enbl
On Color Corrector On
Vid
Card Edge Control Menu:
When the Color Corrector
function submenu is
selected, its related
parameters are now
displayed.
In this example, Red
channel Gain is adjusted
using the Red channel Gain
control knob.
1 2 3 4
ClrC
GAIN
RED Select Red channel
(value) Gain value
Vid
Card Edge Control Menu: