Cornea Systems CT1702 - Manual (Page 28)

CONFIGURING & ADJUSTING the Display: PC (ANALOG) Mode
28
Adjust the Initial Image:
Vertical & Horizontal Alignment
7. If necessary, at the initial display,
adjust the VERTICAL position of the
display by:
•Pressing the MENU button to
display the Main Menu.
•Pressing the CHANNEL ▲ ▼
buttons (repeatedly) to scroll
to the V POSITION (CT1503) or
the POSITION (CT1702) option.
• Press the SELECT button to
select the menu item.
•CT1702: Use the CHANNEL ▲ ▼
buttons (repeatedly) to scroll
to the VERTICAL option on the
sub-menu.
•At the V POSITION or VERTICAL
sub-menu, use the VOLUME
buttons to move the
image up or down until it is
centered vertically on the
display.
•Once you have vertically
centered the display, press the
SELECT button.
8. Now, center the display
HORIZONTALLY by:
•Repeating same general
procedure for the vertical
adjustment, but by selecting
the H POSITION (CT1503) or the
HORIZONTAL (CT1702) option
instead.
•Remember to press the SELECT
button when the display is
centered horizontally.
CT1503 Main Menu:
CT1702 Main Menu:
CT1503 Vertical Position Sub-Menu:
CT1702 Position Sub-menu:
CT1503 Horizontal Position Display: