Cornea Systems CT1702 - Manual (Page 9)

GENERAL INFORMATION: Unpacking Your Monitor & Inventorying the Parts
9
N OTE :
Depending on the voltage requirements for your
area, the Power Cord may be different than what
is indicated in the figure.
When unpacking the Monitor and its components:
• Carefully open the box.
• Lay the box flat on a table and carefully slide the contents out
of the box.
• Do not “dump” the contents out of the box.
I MPORTANT :
DO NOT remove the protective plastic cover from the Monitor.
This cover protects the screen during Installation, and will be
removed when the Installation is complete.
When inspecting the Monitor and its components:
• Verify all the components are present, according to the
previous figure.
• Verify the parts are not damaged.
T IP :
Save the box and other packing material in case the
Monitor needs to be returned.