Cornea Systems CT1702 - Manual (Page 20)

CONNECTING: Your Monitor to a Tuner (TV/CATV)
20
CONNECTING: Your Monitor to a Tuner (TV/CATV)
1. Carefully unpack all the components and verify all the parts are
present and undamaged.
(See page 8.)
2. Organize the cable(s) you need and familiarize yourself with the
connection configuration.
(For the CT1503, see pages 10 & 22. For the CT1702, see pages 11 & 22.)
3. With the Monitor laying screen-side down on a smooth, clean surface,
flip open the Monitor base.
T IP :
For easier access to the cable connections, keep the
Monitor laying (screen-side down) on a smooth surface.
4. Connect the Antenna (from your Cable TV or external/internal
antenna) into the Monitor’s “ANTENNA” connector.
R EMINDER :
The Antenna connection should be hand-tight.
5. Connect the round AC/DC Adapter Plug to the Monitor’s “PWR”
connector.
6. Connect the Power Cord to the AC/DC Adapter.
R
EMINDER
:
Do not plug the Power Cord into the wall outlet/surge
protector yet.
7. If you are not connecting any more components (e.g. DVD or VCR),
continue with the remaining steps.
If you are connecting other components to the Monitor, continue to
the next appropriately labeled “CONNECTING” section.
8. Stand up your Monitor and adjust it for proper viewing. (See page 14.)