Cobra Electronics CP-2525 - Manual (Page 7)

CALLER ID (CONT’D)
The Caller ID log can store 30 names and numbers. When it becomes full, the
oldest will be deleted as new calls are received. You can store an entry from the
log into the Electronic Directory (please see Electronic Directory section for
instructions).
To review Caller ID log entries, press either the Scroll up or down button.
Scrolling up will move you up the list from 1 (newest) to 30 (oldest). Scrolling
down will move you down the list from 30 (oldest) to 1 (newest).
Use the Т ✱ Т and Т#У buttons to scroll left and right if the complete name or
number does not appear in the display.
To exit the log, press the OFF button.
11 12
THE CALLER ID LOG
You can make a call automatically from the Caller ID log. Scroll to the desired
entry and press the TALK button. ÒTALKÓ will appear in the display. The phone
will automatically dial the number shown.
IMPORTANT NOTE: Caller ID data includes an area code even if the call
originates within your local calling area. Since the area code should not be used
for dialing if the number shown is within your area code, press the Loc Call
button rather than the TALK button. The phone will not dial the area code.
MAKING A CALL FROM THE CALLER ID LOG
SPECIAL CALLING SITUATIONS
If your telephone company requires a “1” to be dialed before the main number
for a local call: Scroll to the desired entry and press the EDIT button. The
cursor will flash at the beginning of the phone number line. Press the “1”
keypad button. Press the TALK button. The phone will automatically add “1”
to the called number.
If you need to change the telephone number: The phone number may have
changed since it was first entered into the Caller ID log. To change it, scroll to
the desired entry and press the EDIT button. The cursor will flash at the
beginning of the phone number line.
To move the cursor to the right, press the Т#У keypad button until the digit to be
changed is ßashing. Press the DELETE button, the digit will disappear and the
digit to its right will take its place. Press the keypad button for the new digit.
Press the TALK button to begin dialing.
To end the call, press the OFF button.
DELETING AN ENTRY IN THE CALLER ID LOG
Upon receipt of the 31st call, the oldest entry will be deleted.
To manually delete any entry:
1. Scroll up or down to reach the entry to be deleted.
2. Press the DELETE button. The display will show DELETE?
3. Press the DELETE button again.
To manually delete all entries:
1. Press either the scroll up or down button.
2. Press the DELETE button for more than two seconds. The display will show
DEL ALL?
3. Press the DELETE button again.
To cancel the delete operation, press the OFF button before pressing the DELETE
button for the second time. To return to standby mode, press the OFF button.
CHANNEL SELECTION
25 selectable channels are built into your Cobra Intenna
for optimum interference-free use.
If interference begins during a conversation:
¥
Press and release the CHANNEL button on the
handset. Your phone will automatically scan and
advance to the next clear channel.
¥ If an alert tone (3 beeps) sounds, channel change
was unsuccessful. In that case, move closer to the
phone base and press CHANNEL button again.
COMPANDER NOISE REDUCTION
Your Cobra Intenna has the Cobra Clear Call ¨ PLUS compander noise-reduction
system to minimize background noise for optimum audio performance. The
sound of your phone will be comparable to the performance of a corded phone.
DIGITAL SECURITY
Your Cobra Intenna features 65,000 combinations of digital security coding (in
accordance with FCC regulations) to reduce the chance of interference from your
neighborsÕ cordless phones. These inaudible, electronic codes are transmitted
automatically by your phone to establish a secure link between your cordless
handset and base.