Cobra Electronics CP-2525 User Manual
Page 8
14
13
ELECTRONIC DIRECTORY
Your Cobra
Intenna
cordless phone enables you to store thirty names and
numbers in an electronic directory. These directory memories are in addition to
the thirty Caller ID memories. Any memory from the electronic directory can be
automatically dialed.
To store a name and number from the keypad:
1.
Press the EDIT button.
2.
Enter the phone number using the handset keypad. A maximum of 16 digits
can be entered.
3.
Press the SCROLL up button to begin entering the name. If you do not want
to enter a name, skip to step #5.
4.
Keypad buttons are used enter the name.
NOTE:
Each button can be used to enter the upper and lower case letters
shown on the button. The Т1У, Т0У, ÒCHANNELÓ, Т
✱
Т, Т#У buttons can
also enter speciÞc symbols as shown in Table 1. A maximum of 15
characters per name can be entered.
EXAMPLE:
Enter Ed Jones
1.) Press Т3У twice. ÒEÓ will appear.
2.) Press Т#У to move the cursor one space to the right
3.) Press Т3У four times. ÒdÓ will appear.
4.) Press Т#У.
5.) Press Т0У twice for a blank space.
6.) Press Т#У.
7.) Press Т5У once. ÒJÓ will appear.
8.) Press Т#У and Þnish entering Òo-n-e-sÓ using the
procedures above.
5.
Press STORE. The display will show LOCATION?
6.
Enter a location number (01 to 30).
a.) If the location has not been used, the display will show STORE? Press
the STORE button. The display will show STORED.
b.) If the location is in use, the display will show REPLACE?
1.) If you do want to replace it, press the STORE button. The
display will show REPLACED.
2.) If not, select another location number and press STORE.
The display will show STORED.
7.
The phone will automatically revert to Standby mode in a few seconds.
To store a name and number from the Caller ID log:
1.
Locate the desired log entry using the SCROLL buttons.
2.
Press the EDIT button.
3.
Press STORE. The display will show LOCATION?
4.
Enter a location number (01 to 30). If the location has not been used, the
display will show STORE? Press the STORE button. The display will show
STORED. If replaceing an existing directory entry, please go to step #6b
above.
5.
The phone will automatically revert to Standby mode in a few seconds.
To change a directory memory:
1.
Press the Memory button. The display will show LOCATION?
2.
Either enter a the location number (01 to 30) or use the SCROLL up and
down buttons to Þnd the entry that you want to change. The display will
show the memory entry.
3.
Press the EDIT button. The Þrst digit of the number will ßash. If you do not
want to change the telephone number, press the SCROLL up button (the Þrst
letter of the name will ßash) and go to step #8.
4.
Change the telephone number by using the Т#У and Т
✱
Т buttons to move the
cursor to the digit(s) requiring change. Once at the digit, press the DELETE
button.
5.
Press the new digit on the keypad. The display will show the new telephone
number.
6.
Repeat step #5 for as many digits as necessary.
7.
A.) If you are now Þnished, go to step #8.
B.) If you also want to change the name, press the SCROLL up button. The
Þrst letter of the name will ßash. Repeat steps #4 through #6 to change
the characters in the name.
ELECTRONIC DIRECTORY (CONT‘D)
TABLE 1
Number of times key is pressed during character entry
Key
1
2
3
4
5
6
7
8
9
1
&
'
(
)
,
-
.
/
1
ABC
2
A
B
C
a
b
c
2
DEF
3
D
E
F
d
e
f
3
GHI
4
G
H
I
g
h
i
4
JKL
5
J
K
L
j
k
l
5
MNO
6
M
N
O
m
n
0
6
PQRS
7
P
Q
R
S
p
q
r
s
7
TUV
8
T
U
V
t
u
v
8
WXYZ
9
W
X
Y
Z
w
x
y
z
9
OPER
0
0
Blank
channel
*
#
*
To move the cursor to the left
#
To move the cursor to the right